International Conference

  1. Dongha Hwang, Jehyun Baek, Eungsoo Choi and Sangho Lee, 2012, "Numerical Analaysis of the Flow in the Blast Furnace with Population Balance Model(PBM)," SCANMET IV – 4th International Conference on Process Development in Iron and Steelmaking, 2012, June 10-13, Luleå, Sweden
  2. Je Hyun Baek and Minsuk Choi, 2008, "A Numerical Study on Rotating Stall Inception in an Axial Compressor," EU-Korea Conference on Science and Technology(EKC2008), August 28-31, Heidelberg, Germany
  3. Minsuk Choi, Seong Hwan Oh, Han Young Ko and Je Hyun Baek, 2008, “Effects of the Inlet Boundary Layer Thickness on the Rotating Stall in an Axial Compressor,” ASME Turbo Expo 2008, June 9-13, Berlin, Germany, GT2008-50886
  4. Minsuk Choi, Seong Hwan Oh, Han Young Ko and Je Hyun Baek, 2008, “Effects of the Low Reynolds Number on the Loss Characteristics in a Transonic Axial Compressor,” 4th Asian Joint Conference on Propulsion and Power 2008 (AJCPP2008), March 6-8, Gyeongju, South Korea
  5. Minsuk Choi and Je Hyun Baek, 2008, “Influence of the Number of Flow Passages in the Simulation of the Rotating Stall,” The Twelfth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery(ISROMAC-12), February 17-22, Hawaii, USA, ISROMAC12-2008-20106
  6. Minsuk Choi, Jongil Park and Je Hyun Baek, 2007, “A Numerical Study of the Clocking Effect in an Axial Turbine,” The 7th Asian Computational Fluid Dynamics Conference(ACFD7), November 26-30, Bangalore, India, Invited Paper
  7. Kyungseh Lee and Je Hyun Baek, 2007, “Development of a Large Eddy Simulation Method on Unstructured Meshes,” The 7th Asian Computational Fluid Dynamics Conference(ACFD7), November 26-30, Bangalore, India
  8. Minsuk Choi, Jun Young Park and Je Hyun Baek, 2007, “Effect of the Low Reynolds Number on the Internal Flows in a Transonic Axial Compressor,” AHS Specilists’s Conference – International Forum on Rotorcraft Multidisciplinary Technology for Dual-Use Applications, October 15-17, Seoul, South Korea, Paper No. 16-2
  9. Minsuk Choi, Jongil Park, Hee Taeg Chung and Je Hyun Baek, 2007, “Relation of the Clocking Effect and the Secondary Flow in a 1.5 Stage Axial Turbine,” The 9th Asian International Conference on Fluid Machinery(AICFM-9), October 16-19, Jeju, South Korea, AICFM9-260
  10. Semi Kim, Junyoung Park, Kukyoung Ahn and Jehyun Baek, 2007, “Optimization of a Centrifugal Compressor Impeller using a Response Surface Method,” The 9th Asian International Conference on Fluid Machinery(AICFM-9), October 16-19, Jeju, South Korea, AICFM9-313
  11. Yohan Jung and Je Hyun Baek, 2007, “A Numerical Study on the Unsteady Flow Behavior and the Performance of an Automotive Sirocco Fan,” The 9th Asian International Conference on Fluid Machinery(AICFM-9), October 16-19, Jeju, South Korea, AICFM9-274
  12. Minsuk Choi, Je Hyun Baek, Seong Hwan Oh and Dock Jong Ki, 2006, “Role of the Hub-Corner-Separation on the Rotating Stall,” 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, July 9-12, Sacramento, California, USA, AIAA 2006-4462
  13. Minsuk Choi, Je Hyun Baek, Seong Hwan Oh and Dock Jong Ki, 2006, “Effects of the Inlet Boundary Layer Thickness on the Rotating Stall in an Axial Compressor,” ASME Joint U.S.-European Fluids Engineering Summer Meeting, July 17-20, Miami, Florida, USA, FEDSM2006-98271
  14. Jongil Park, Minsuk Choi and Jehyun Baek, 2006, “Effects of the Clocking on the Internal Flow in a 1.5 Stage Axial Turbine,” ASME Turbo Expo 2006, May 8-11, Barcelona, Spain , GT2006-90472
  15. Hyun Woo Nam and Je Hyun Baek, 2006, “A Numerical Analysis on the Collison Behavior of Water Droplets,” Parallel CFD 2006(Internal Conference on Parallel Computational Fluid Dynamics 2006), May 15-18, Busan, Korea, pp. 381
  16. Minsuk Choi, Bharat K. Soni and Jehyun Baek, 2005, “Implementation of the Reynolds Stress Model for Simulations of Internal Flows in Turbomachinery,” Huntsville Simulation Conference (HSC05), October 26-27, Huntsville, Alabama, USA
  17. Young-Ho Kim, Jong-Eun Kim, Minsuk Choi and Jehyun Baek, 2005, “Multiphysics Modeling and Simulation of Pulsatile Flow through a Curved Stenotic Artery,” Huntsville Simulation Conference (HSC05), October 26-27, Huntsville, Alabama, USA
  18. Minsuk Choi, Junyoung Park and Jehyun Baek, 2005, “Effects of the Inlet Boundary Layer Thickness on the Flow and Loss Characteristics in an Axial Compressor,” ASME Turbo Expo 2005, June 6-9, Reno-Tahoe, Nevada, USA, GT2005-68580
  19. Minsuk Choi, Junyoung Park and Jehyun Baek, 2005, “Effects of the Inlet Boundary Layer Thickness on the Hub Corner Stall and Tip Leakage Flow,” 6th Mississippi State - UAB Conferences on Differential Equations & Computational Simulations, May 13-14, Mississippi State University, Mississippi, USA
  20. Lee, G. H., Park, J. I. and Baek, J. H., 2004, "Performance assessment of turbulence models for the quantitative prediction of tip leakage flow in turbomachines", ASME TurboExpo 2004, GT2004-53403, Vienna, Austria
  21. Lee, G. H. and Baek, J. H., 2003, "A comparative study of turbulence models for the prediction of tip leakage flow in an axial-flow turbomachinery", 12th International Conference on Fluid Flow Technologies, Budapest, Hungary
  22. Choongmo Yang, Jehyun Baek, Shigeru Saito and Takashi Aoyama, 2002, "Numerical Study on the Blade-Vortex Interaction of Helicopter Rotor with Lateral Blowing", Heli Japan 2002, AHS International Meeting on Advanced Rotorcraft Technology and Life Saving Activities, T231-2
  23. G.H. Lee, J.H, Baek, 2002, "A Numerical Study on the Structure of Tip Clearance Flow in a Highly Forward-Swept Axial-Flow Fan", ASME-European Joint Conference on 6th International Symposium on Advances in Numerical Modeling of Aerodynamics and Hydrodynamics in Turbomachinery, held at Montreal, Canada
  24. G.H. Lee and J.H. Beak, 2001, “A Numerical Study on the Similarity of Laminar Flows in Orthogonally Rotating Rectangular Ducts and Stationary CurvedRectangular Ducts of Arbitrary Aspect Ratio,” 7th Int. Cong. on Fluid Dynamics and Propulsion, Senei, Egypt
  25. Sungho Yoon and Je Hyun Baek, 2000, "Off-design performance analysis ofcentrifugal compressor with TEIS Model, Two-zone model and Stanitz's Equations," 6th Asian Int. Conf. On Fluid Machinery, pp.72-76
  26. H.J. Myung, H.S.Rew, J.H.Baek, 2000, "Tip clearance flow investigation in a highly forward-swept axial-flow fan using LDV," 8th ISROMAC
  27. GongHee Lee, ChoongMo Yang, and JeHyun Baek, 2000, "Viscous Flow Analysis for Three-Dimensional Wing in Ground Effect Using Multi-Block & Parallel Computation Technique," Workshop on Drag Reduction of Aircraft and Ground Transportation, pp.10-11
  28. JunYoung Park, and JeHyun Baek, 2000, "Two-Dimensional Navier-Stokes Simulation on Rotor/Stator Interaction through One-Stage of Axial Turbine Using a Phase Lagged Method," 7th Interantional conference on Numerical Grid Generation in Computational Field Simulations, pp.1039-1049
  29. JunYoung Park, Hee Taeg Chung, Jehyun Baek, and DaeSung Lee, 2000, "Influence of Tip Clearance on the Performance and Flow of Transonic Compressor Rotor," 2nd Int. Symp. on Fluid Machinery and Fluid Engineering, pp. 203-209
  30. Choongmo Yang and Jehyun Baek, 2000, "Study on Blade Wake Interaction Using Grid Refinement Method, " 航空宇宙數値 Simulation 技術 Symposium, Tokyo, Japan, 6.7-9., pp.56
  31. Choongmo Yang and Jehyun Baek, 2000, "Study on Blade Wake Interaction Using Grid Refinement Method," Special Paper, National Aerospace Laboratory, Tokyo, Japan
  32. Choongmo Yang, Jehyun Baek, Shigeru Saito, Masataka Shirai, Hisashi Suenaga, Rina yamada, Uichi Nishizawa, Anzhong Tan, Noriyuki Kanehira, and Shojiro Shindo, 2000, "Numerical And Experimental Investigations of Tip Vortex with Lateral Wing-Tip Blowing," 26 th European Rotorcraft Forum, Den Hang, Netherland, 9.26-28. pp.44.1-44.18